Orion LBI-38888K - Manual (Page 59)

59
TURNING SCAN ON
1. Toggle scan operation ON by pressing k . The SCAN indicator will
turn ON when the radio is scanning.
Scanning will stop while microphone is OFF-hook if hookswitch feature
is enable through programming.
2. When a channel on the scan list receives a channel assignment, the radio
unmutes on the assigned channel, BSY indicator comes ON and the
received scan channel is displayed.
•
The radio will continue scanning if a new channel is selected when
scan is ON.
•
Pressing the PTT button when scan is ON will cause the radio to
transmit on the displayed channel or to the currently selected channel
depending on programming.
•
Pressing
< when scan is ON will cause the radio to recall the
scanned channel that was last received. This channel is recalled for a
period equal to the scan hang time.
TURNING SCAN OFF
Toggle scan operation OFF by pressing k . The radio will resume
operation on the selected channel.
NOTE