Optoma Digital Tuner Output Projector - Manual (Page 15)

15 ... English
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
12345678901234567890123456789012123456789012345678901
Using the Remote Control
Power/Standby
 Refer to the “Power On/Off the Projector” section on pages
10-11.
Re-Sync
 Automatically synchronizes the projector to the input source.
Volume + / -
 Increases/decreases speaker volume.
Reset
 Changes the adjustments and settings to the factory default
value.
Mute
 Momentarily turns off the audio and video.
Keystone /
 Adjusts image distortion caused by tilting the projector (±16
degrees).
Page Up (Computer mode only)
 Use this button to page up. This function is only available
when the projector is connected to a computer via an USB cable.
Page Down (Computer mode only)
 Use this button to page down. This function is only available
when the projector is connected to a computer via an USB cable.
Freeze
 Press “Freeze” to pause the screen image.
Four Directional Select Keys
 Use to select items or make adjustments to
your selection.
Menu
 Press “Menu” to launch the on screen display menu. To exit
OSD, press “Menu” again.
Enter
 Confirm your selection of items.
VGA
 Press “VGA” to choose Analog RGB, component and HDTV
source.
S-Video
 Press “S-Video” to choose S-Video source.
Composite
 Press “composite” to choose Composite video source.
User Controls