Specifications – Onkyo TX-DS787 User Manual
Page 73
73
Specifications
AMPLIFIER SECTION
Continuous Average Power output (FTC)
All channels:
100 W per channel min. RMS at
8
Ω, 2 channels driven from 20
Hz to 20 kHz with no more than
0.08% total harmonic distortion.
130 W min. RMS at 6
Ω, 2
channels driven from 1 kHz with
no more than 0.1% total
harmonic distortion.
Continuous Power output (DIN) 135 W at 6
Ω
Maximum Power output (EIAJ)
160 W at 6
Ω
Dynamic Power Output (Stereo) 2
× 250 W at 3 Ω
2
× 210 W at 4 Ω
2
× 130 W at 8 Ω
Total Harmonic Distortion:
0.08% at rated power
0.08% at 1 W output
IM Distortion:
0.08% at rated power
0.08% at 1 W output
Damping Factor:
60 at 8
Ω
Input Sensitivity and Impedance
PHONO:
2.5 mV, 50 k
Ω
LINE (CD, TAPE, DVD,
VIDEO 1-4):
200 mV, 50 k
Ω
MULTICHANNEL INPUT
(FRONT L/C/R, SURROUND
L/R, SURROUND BACK L/R):200 mV, 50 k
Ω
(SUBWOOFER):
36 mV, 50 k
Ω
COAXIAL 1, 2 (DIGITAL):
0.5 Vp-p, 75
Ω
DVD, VIDEO1-4:
1 Vp-p, 75
Ω
1 Vp-p, 75
Ω (Y)
0.28 Vp-p, 75
Ω (C)
COMPONENT VIDEO 1, 2:
1 Vp-p, 75
Ω (Y)
0.7 Vp-p, 75
Ω (P
B
, P
R
)
Output Level and Impedance
Rec out (TAPE, VIDEO 1, 2):
200 mV, 2.2 k
Ω
Pre out:
1 V, 470
Ω
VIDEO (VIDEO 1, 2, MONITOR OUT):
1 Vp-p, 75
Ω
1 Vp-p, 75
Ω (Y)
0.28 Vp-p, 75
Ω (C)
COMPONENT VIDEO OUT: 1 Vp-p, 75
Ω (Y)
0.7 Vp-p, 75
Ω (P
B
, P
R
)
Phono Overload:
110 mV RMS at 1 kHz, 0.5% T.H.D.
Frequency Response:
20 Hz to 30 kHz:
±1 dB
(CD in Direct mode)
10 Hz to 100 kHz: +1 dB,-3 dB
(CD in Direct mode)
RIAA Deviation:
20 Hz to 20 kHz :
±0.8 dB
Tone Control
Bass:
±12 dB at 100 Hz
Treble:
±12 dB at 10 kHz
Signal-to-Noise Ratio (Stereo)
Phono:
80 dB (IHF A, 5 mV input)
CD/Tape:
100 dB (IHF A, 0.5 V input)
Muting:
–50 dB
TUNER SECTION
FM
Tuning Range:
87.5 to 108.0 MHz (50-kHz steps)
Usable Sensitivity
Mono:
11.2 dBf, 1.0
µV (75 Ω IHF)
0.9
µV (75 Ω DIN)
Stereo:
17.2 dBf, 2.0
µV (75 Ω IHF)
23
µV (75 Ω DIN)
50 dB Quieting Sensitivity
Mono:
17.2 dBf, 2.0
µV (75 Ω)
Stereo:
37.2 dBf, 20
µV (75 Ω)
Capture Ratio:
2.0 dB
Image Rejection Ratio:
USA & Canadian models:
40 dB
Other area models:
85 dB
IF Rejection Ratio:
90 dB
Signal-to-Noise Ratio
Mono:
76 dB
Stereo:
70 dB
Alternate Channel Attenuation:
55 dB
Selectivity:
50 dB (DIN)
AM Suppression Ratio:
50 dB
Total Harmonic Distortion
Mono:
0.2%
Stereo:
0.3%
Frequency Response:
30 Hz to 15 kHz,
±1.0 dB
Stereo Separation:
45 dB at 1 kHz
30 dB at 100 Hz to 10 kHz
AM
Tuning Range
USA & Canadian models:
530 to 1,710 kHz (10-kHz steps)
European & Australian models:
522 to 1,611 kHz (9-kHz steps)
Worldwide models:
531 to 1,602 kHz (9-kHz steps)
530 to 1,710 kHz (10-kHz steps)
Usable Sensitivity:
30
µV
Image Rejection Ratio:
40 dB
IF Rejection Ratio:
40 dB
Signal-to-Noise Ratio:
40 dB
Total Harmonic Distortion:
0.7%
GENERAL
Power Supply:
AC 120 V, 60 Hz
(USA & Canadian models)
AC 230-240 V, 50 Hz
(European & Australian models)
AC 220-230 V, 50/60 Hz
(some Asian models)
AC 220-230 and 120 V switchable,
50/60 Hz (Worldwide models)
Power Consumption:
5.5 A
440 W
Dimensions (W
× H × D):
435
Ч 175 Ч 453 mm
17-1/8"
Ч 6-7/8" Ч 17-13/16"
Weight:
36.6 lbs. (USA & Canadian models)
16.9 kg (European models)
17.6 kg
(Australian & worldwide models)
17.4 kg (some Asian models)
REMOTE CONTROLLER
Transmitter:
Infrared
Signal range:
Approx. 5 meters, 16 ft.
Power supply:
Two “AA” batteries (1.5 V
× 2)
Specifications and features are subject to change without notice.
Power supply and voltage vary depending on the area in which the unit
is purchased.