Olympus FE-290 - Manual (Page 28)

Printing pictures
28
EN
3
Press OF/ <.
• Printing starts.
• When printing is finished, the picture selection screen is
displayed. To print another picture, press XY to select a
picture, and press OF/
<.
• When you are finished, disconnect the USB cable from
the camera with the picture selection screen displayed.
4
Disconnect the USB cable from the camera.
5
Disconnect the USB cable from the
printer.
1
Display the screen according to Steps 1 and 2 on P. 27, and press H.
2
Select [CUSTOM PRINT], and press H.
3
Make the print settings according to the operation guide.
You can use [EASY PRINT] even when the camera is turned off or in shooting mode. With
the camera turned off or in shooting mode, connect the USB cable. The selection screen
for the USB connection is displayed. Select [EASY PRINT].
g “EASY PRINT” Step 3 (P. 28), “Other print modes and print settings” Step 2 (P. 28)
Other print modes and print settings (CUSTOM PRINT)
OK PC / CUSTOM PRINT
EASY PRINT START
PRINT EXIT
OK
USB
PC
EASY PRINT
CUSTOM PRINT
EXIT
SET Operation guide
d4347_e_0000_7.book Page 28 Tuesday, July 17, 2007 11:23 AM