Oricom CARE90 - Manual (Page 12)

10
Operation
Mute
If you wish to speak privately to someone else in the room without your
caller overhearing, press and hold the button underside the handset.
You will still be able to hear the callers but they cannot hear you during
the mute operation. To resume normal conversation, release the button.
Hands free function
1. Press button for one second. The hands free function will be
activated and you will hear a dial tone within 2-3 seconds.
2. Dial the required telephone number. Adjust the speaker volume using
the volume control located on the left side of the telephone.
3. Speak towards the microphone located on the front edge of the
telephone.
4. Press again to end the call.
You can switch between handset and hands free mode by simply pressing
spk symbol and hanging up the handset or lifting the handset when in
handsfree mode.
Please note!
Please remember that in hands free mode it is only possible for
one person at a time to talk. The switch-over between speaker
and microphone is automatic and dependent on the sound level of
the incoming call and the microphone respectively. It is therefore
essential that there are no loud noises, e.g. music, in the immediate
vicinity of the telephone, as this will disrupt the hands free function.