Optimus 12-2114 - Manual (Page 13)

13
USING THE FACEPLATE
The stereo’s faceplate must be in
place for the stereo to operate. When
you remove it, the display turns off
and the stereo cannot be used. This
is a simple but effective security
measure.
Any stored stations remain in memo-
ry when the faceplate is removed.
INSTALLING THE
FACEPLATE
Caution: Avoid pushing on the dis-
play or pressing any buttons while in-
stalling the faceplate.
1. Insert the right edge of the face-
plate into the right edge of the
recess. The slot in the faceplate
interlocks with the tab in the
recess.
2. Gently push the left edge of the
faceplate into the recess until
you hear a click.
REMOVING THE
FACEPLATE
1. Press REL . You hear a click and
the faceplate swings out.
2. Remove the faceplate, then
store it in the supplied carry
case.
Caution: To keep the metal con-
necting pins clean, do not touch the
connecting pins in the recess or on
the back of the faceplate.
REL
12-2114.fm Page 13 Wednesday, July 14, 1999 12:35 PM