Omron HR-310 - Manual (Page 19)

19
WEARING THE CHEST BELT
CHEST BELT
The chest belt counts your heartbeat and transmits this data to the watch.
1. Wet the conductive pads on the
underside of the chest belt with a few
drops of water or conductive gel to
ensure solid contact.
2. Strap the chest belt across your chest
making sure the belt sits snugly
below your pectoral muscles.
TIPS
• For accurate heart rate readings, make
sure the chest belt is placed above your heart.
• Avoid areas with dense chest hair.
• In dry, cold climates, it may take several minutes for the chest belt
to function steadily. This is normal and should improve with several
minutes of exercise.
NOTE: If the watch is kept idle without receiving a heart rate signal
for about 5 minutes, the heart rate mode will quit.