Binatone FM-320 - Manual (Page 5)

5
ENGLISH
SPECIAL SAFETY MEASURES
X Never pour water into the appliance!
Pour the ceramic beads into the bath. The mas-
sage is performed by warmed ceramic beads,
not by water!
X To avoid overheating your feet, put on socks
before the massage.
X Never place the whole appliance in water.
X Do not move the appliance or unplug from the socket during
operation of the appliance.
X Do not stand in the appliance and only use it whilst in a sitting
position.
X To avoid fire or electric shock, do not remove leads designed
for maintenance of the electrical appliance. The electrical ap-
pliance has no elements that require a service.
X Avoid any water splashing into the controls.
X Do not use for more than 20 minutes. After 20 minutes of
continuous work, the massager should be switched off and
allowed to cool to room temperature.
X It is not advisable to use the massager if you have phlebitis,
varicose veins, severe leg edema, burns or open wounds,
diseases of the nervous system (for example, sciatica) or dur-
ing pregnancy. In the above cases, we recommend you to
consult your doctor before use of the massager.
X When in use the appliance has a hot surface. Persons insensi-
tive to heat must be careful when using this appliance.
X Empty the ceramic beads from the appliance though the spe-
cial cavity.
DESCRIPTION OF APPLIANCE
PARTS
Figure A:
1. Body
2. Lid
3. Operating mode switch:
0 - Off
1 - Heating
2 - Keep hot
3 - Keep warm
4. Removable massage attachments at the center of the appli-
ance.
5. Air venting holes
6. Surface for acupuncture massage
7. Heating area
8. Maximum level for filling with ceramic beads «MAX»
9. Bath emptying cavity
Figure B:
10.Non slip feet
11. Cord
12. Bottom compartment for dust removing with cover