Olympus C-2/D-230 - Manual (Page 10)

10 En
En
Turning the camera off:
Close the lens barrier.
The camera turns off.
WHEN PLAYING BACK PICTURES
Turning the monitor on:
Press the button with the lens
barrier closed.
The camera turns on in the Play mode
and the monitor turns on.
Turning the monitor off:
Press the button.
The camera and the monitor turns off.
Note When the camera is powered by batteries, it turns off automatically when no
operation has been performed for 1 minute. You need to turn the camera on
again.
SETTING THE DATE AND TIME
1 Press the button.
The monitor turns on.
2 Press the button.
The monitor shows the Play menu.
3 Select [SETUP] using the / buttons and press the button.
4 Select [ ] using the / buttons and press the button.
5 Select the date format “Y-M-D (Year-Month-Day)”, “M-D-Y (Month-Day-
Year)” or “D-M-Y (Day-Month-Year)” using the
/ buttons, and
press the button.
The monitor shows date setting screen.
6 Set the first figure using the / buttons and press the button.
The cursor moves to the next figure.
7 Repeat until the date and time settings are set.
8 Press the button when the clock shows 00 seconds.
The date and time setting is completed.
9 Press the button.
The monitor turns off.
Caution
If the camera is left for about 1 hour with the batteries removed, the date and
time settings may be canceled and revert to the default settings. Make sure that
the date and time settings are correct before taking an important picture.
Note The date and time can be set both in the Record mode and the Play mode using
the same procedure.
1/Basic02_C2-E.65E 01.8.17, 10:04 AM 10