Onkyo DV-L5X - Manual (Page 40)

40
This player is capable of digital audio output for Dolby Digital,
DTS, MPEG, and signals with a sampling rate of 96 kHz.
Make settings in the Setup screen Audio menu to reflect the
capabilities of the components that you have made digital
connections to.
Notes
• If you have already completed the Setup Navigator screen
operations, the settings on this page have already been set by
the player.
• If you have made only stereo line connections (analog) using the
supplied audio cord, it is not necessary to make any changes in
this menu.
■ Dolby Digital Out
This player is capable of outputting the Dolby Digital surround
sound audio signal. When the player is connected to an AV
component that has a built-in Dolby Digital decoder, select
[Dolby Digital]. This player can also convert the Dolby Digital
signal to a digital Linear PCM signal, the same digital signal
output from a CD. Select [Dolby Digital
3 PCM] when you
have made connections to an amplifier or receiver with a
Dolby Pro Logic decoder or a Digital Analog Converter (DAC).
Adjusting the Dynamic Range of the
Audio Soundtrack
Audio DRC stands for Audio Dynamic Range Compression.
When Audio DRC is on, soft sounds such as dialog can be
heard more clearly without making loud sounds even louder.
Select from three levels of compression depending on how
much effect you want. When Audio DRC is set to [Off], there is
no effect on the audio source.
Make changes to the [Audio DRC] setting in the Setup screen
Audio menu.
—
—
— 96kHz
3 48kHz
— MPEG 3 PCM
V2 Video1 General Language
Exit Move
Audio DRC
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
Audio
Off
On
Off
Dynamic playback at low volume
SETUP
—
—
—
—
V2 Video1 General Language
Exit Move
Audio DRC
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
Audio
Off
Dolby Digital
Dolby Digital
3 PCM
96kHz 3 48kHz
MPEG 3 PCM
Change Dolby Digital output mode
SETUP
Settings: Off (Factory setting)
On
Notes
• Audio DRC is only effective with Dolby Digital audio sources.
• The level of Audio DRC may differ depending on the DVD.
• If you have set the [Dolby Digital Out] to [PCM] and the [Digital
Out] setting to [On], the Audio DRC effect is output through the
digital out jack.
• The effect of Audio DRC depends on your speakers and AV
amplifier settings.
Settings: Dolby Digital
Dolby Digital 3 PCM
Setting the Digital Audio Output
Adjusting Audio and Video Settings
Expert denotes more detailed settings. If the item is not displayed, please refer to page 39 to display it.