Oricom PIX2000 - Manual (Page 21)

19
Caller ID Service
Caller ID Service
The caller’s information will be displayed and recorded if you have
subscribed to Caller ID service from your telephone network service
provider.
When the telephone rings, the caller’s information will be displayed on
the handset LCD display. This information includes the phone number.
The handset can store up to 20 calls for later review (up to 16 digits
and 16 characters for each record). When the memory is full, a new call
automatically replaces the oldest call in the memory.
Note:
If the caller’s information includes Date/Time, the Date/Time will be
stored with the record.
If the callers number is the same as the number in the phonebook
memory, the matched name stored in the phonebook memory will be
displayed.
The handset will prompt you if there is an unanswered call.
When the handset is in standby mode, “ ” will be displayed prior to
other display information.
If you have reviewed all the missed calls from the handset, the “ ” icon
will disappear.
Note:
1. If you have reviewed all the missed calls from one handset, the
“ ” icon will still remain on other handsets.
2. Press * key to toggle between name and number.
Review Caller ID Record
1. When the handset is in standby mode, press key to display the
information for the last call received.
2. Press or key to review all call records.
3. When you scroll to the end, “--(GO BACK)--” will be shown.
PIX2000 User Guide.indd 章节2:19 PIX2000 User Guide.indd 章节2:19 2009-6-30 17:33:33 2009-6-30 17:33:33