Optimus SCR-100 - Manual (Page 9)

9
specifications could damage the SCR-100 or the
adapter.
• Always connect the DC adapter to the SCR-100
before you connect it to the power source. When
you finish, disconnect the adapter from the pow-
er source before you disconnect it from the
SCR-100.
Follow these steps to power the SCR-100 from DC
power.
1. Set the adapter’s voltage switch to 3V.
2. Insert the Adaptaplug into the cord so it reads
TIP +.
3. Insert the adapter’s barrel plug into the SCR-
100’s DC 3V jack.
14-1252.fm Page 9 Thursday, October 28, 1999 3:27 PM