Onkyo T-4355 - Manual (Page 9)

9
Remote Controller—Continued
The T-4355 doesn’t have its own remote controller, but
it can be controlled by using the RC-627S remote con-
troller that’s supplied with the Onkyo A-9355/A-9155
Integrated Amplifier. The T-4355 and A-9355/A-9155
must be connected with an
cable and an audio cable
for this to work.
When controlling the T-4355 with the A-9355/A-9155’s
remote controller, point the controller at the
A-9355/A-9155’s remote control sensor, as shown.
Notes:
• The remote controller may not work reliably if the
A-9355/A-9155 is subjected to bright light, such as
direct sunlight or inverter-type fluorescent lights.
Keep this in mind when installing.
• If another remote controller of the same type is used
in the same room, or the A-9355/A-9155 is installed
close to equipment that uses infrared rays, the remote
controller may not work reliably.
• Don’t put anything, such as a book, on the remote
controller, because the buttons may be pressed inad-
vertently, thereby draining the batteries.
• The remote controller may not work reliably if the
A-9355/A-9155 is installed in a rack behind colored
glass doors. Keep this in mind when installing.
• The remote controller will not work if there’s an
obstacle between it and the A-9355/A-9155’s remote
control sensor.
Using the Remote Controller
ON OFF POWER
ON
OFF OFF
ON
A SPEAKERS B BASS TREBLE STANDBY
PHONES
MUTING PURE DIREC T LOUDNESS
CD MD
DOCK
TUNER PHONO
TAPE
T-4355
A-9355/A-9155
30˚
5 m
30˚
RC-627S
Remote control sensor