Oricom S209 - Manual (Page 50)

The System
- 46 -
2. Select the number of rings.
3. Press
OK to confirm. The new setting is saved.
CHANGING THE SYSTEM PIN
The system PIN is used for registering, deleting handsets, and protecting the access rights to some of the other menus. The default
system PIN is 0000. You can personalize the PIN for greater security.
1. Press
MENU
.
2. Select SYSTEM. Press
OK
.
3. Select CHANGE PIN. Press OK.
4. Enter the system PIN. Press OK to confirm. Use DELETE to make correction.
5. Enter the new system PIN. Press OK.
6. Enter the new system PIN again for verification.
7. Press
OK . The new setting is saved.
RESETTING TO DEFAULT SETTINGS
The default settings are the original factory settings of your phone. You can reset your phone settings to factory default.
1. Press
MENU
.
2. Select SYSTEM. Press
OK
.
3. Select RESET. Press
OK
.
4. Enter the system PIN. Press OK to confirm. Use DELETE to make correction. CONFIRM? is displayed.
5. Press
YES
to confirm. All settings have reset.
To find out what settings are being reset, see Default Settings on page 46.
NOTE: After reset, your handset returns to the “Hello” screen if your model supports multiple country
settings, and you must configure your country settings before using your phone, refer to Greeting you with
“HELLO” on page 9.
NOTE: Forgotten PIN. Write down your PIN and save it for future use. If you have forgotten the PIN, call your
manufacturer for assistance.