Omron Healthcare HEM670IT - Manual (Page 25)

SETTING THE DATE AND TIME
25
Set the monitor to the current date and time before taking a measurement
for the first time. If the date and time are not set correctly, the
measurement values stored in the memory will have the wrong date and
time.
Set the date and time in the following situations:
1. Before you use the monitor for the first time
2. After battery replacement
3. After resetting the monitor
1. TO CHANGE THE SETTING
Press the START/STOP button
to turn the power off, then press
the SET button.
Continue to press the SET button
until the Time Set Screen displays.
The year flashes on the display with the current setting.
2. SETTING THE YEAR
Press the ( ) button to set the year to the current year.
Press the SET button to confirm the setting.
The month flashes on the display.
3. SETTING THE MONTH
Press the ( ) button to set the month to the current month.
Press the SET button to confirm the current month.
The day flashes on the display.
Time Screen
HEM-6040-Z_EN_SP_Q6_051507.qxd 5/15/07 12:25 PM Page 25