Sylvania 6900DTD - Manual (Page 57)

3 Select DISPLAY MODE, using o o / p p
navigation buttons , then press ENTER.
• Display mode options will appear.
4 Select the desired display mode using
o o / p p navigation buttons, then press
ENTER.
• The display mode will be set.
NOTE:
You can choose the display mode as you prefer.
Refer to “INFORMATION on Screen Ratio and
Display Mode” on page 58 for further information.
5 Press SETUP to exit SETUP menu.
CAUTION:
If the TV is left in LETTERBOX or SIDEBAR for a
long period of time, the still image may cause a burn-
in effect damaging the TV screen.
DISPLAY
QUIT
CHANNEL
DISPLAY
CLOCK
DETAIL
SCREEN RATIO 4:3
DISPLAY MODE LETTERBOX
DISPLAY
QUIT
CHANNEL
DISPLAY
CLOCK
DETAIL
SCREEN
DISPLAY
Select display mode.
LETTERBOX
ZOOM
FULL
57
EN
1A23
Advanced Operation
5 Ad
v
anced
Operation
EN
1A23
EN
1A23
EN
1A23
EN
1A23
EN
1A23
appear because of TV settings.
appear because of STB settings.
STB 4:3 TV
1080i video
output signal
When your 4:3 TV (capable of receiving a 1080i
signal) with the screen ratio 4:3 receives a 1080i
video output signal from STB, black/gray bars
may appear at the top and bottom of the screen.
That is because STB has been set to the screen
ratio to 4:3 and the display mode SIDEBAR.
We recommend setting the STB screen ratio to
16:9, then setting the display mode as prefered,
or changing the resolution selection switch on
the rear panel of the STB to “480p” or “480i.”
INFORMATION on 4:3 TV
ST201UB.qxd 04.3.9 4:04 PM Page 57