Timer program extension, 27 - en, Set beginning hour – Sylvania D6313CCB User Manual
Page 27: Set beginning minute, Set end hour, Set end minute, Set the tape speed, Finish setting the program, Set the timer, 0b19
- 27 -
EN
0B19
To shift the time schedule of an automatic timer
recording.
1)Press the POWER button.
2)Repeat step [1] on page 26.
3)Press the RECORD button and select the desired
program using the PLAY/Kor STOP/Lbutton.
4)Press the RECORD button again.
Each additional push will shift forward the
begin/end time for recording by 10 minutes. When
the recording is already in progress, each additional
push will shift forward the end time only. If you
want to cancel while setting, press the
PAUSE/STILL button on the remote control. The
recording time returns to the original time.
NOTE: When you shift forward the time schedule
during recording, the recording speed will automati-
cally be set to the SLP mode.
5)Press the F.FWD/Bor REW/sbutton to exit the
setting menu. Then press the MENU button on the
remote control to return to original mode.
TO CORRECT A PROGRAM
•
While setting a program; press the REW/sbutton
to go back one step and enter the correct numbers
using the PLAY/Kor STOP/Lbutton.
•
After setting a program;
1)Press the POWER button.
2)Repeat steps [1] - [2] on page 26.
3)Press the F.FWD/Bbutton (or press the REW/s
button to go back one step) until the part you
want to correct begins flashing, then make the
changes pressing the PLAY/Kor STOP/Lbutton.
4)Press the POWER button to set automatic timer
recording.
TO CANCEL AN AUTOMATIC TIMER
RECORDING
•
After setting a program;
1)Press the POWER button.
2)Repeat steps [1] ~ [2] on page 26 and select a
program you want to cancel.
3)Press the T-PROG. CLEAR button.
4)Press the MENU button on the remote control to
return to TV mode.
•
While recording is in progress;
1)Press POWER button.
2)Press the STOP/EJECT button on the TV/VCR.
5
Set beginning hour
Press the PLAY/Kor STOP/Lbutton
until the desired hour appears.
(Example: “ 7, PM” for 7:30PM)
Then, press the F.FWD/Bbutton.
6
Set beginning minute
Press the PLAY/Kor STOP/Lbutton
until the desired minute appears.
(Example: “30” for 7:30PM)
Then, press the F.FWD/Bbutton.
7
Set end hour
Press the PLAY/Kor STOP/Lbutton
until the desired hour appears.
(Example: “8, PM” for 8:50PM)
Then, press the F.FWD/Bbutton.
8
Set end minute
Press the PLAY/Kor STOP/Lbutton
until the desired minute appears.
(Example: “50” for 8:50PM)
Then, press the F.FWD/Bbutton.
9
Set the tape speed
Press the PLAY/Kor STOP/Lbutton
until the desired tape speed appears.
(Example: SP)
10
Finish setting the program
Press the F.FWD/Bor REW/sbutton. The program is
now completed.
•
To set another program, repeat steps [2] to [10].
•
Press the MENU button on the remote control to
return to original mode.
11
Set the timer
Press the POWER button to set automatic timer
recording. The TIMER REC indicator lights up.
•
You must turn off the TV/VCR to activate auto-
matic timer recording.
If power is not turned off and you continue watch-
ing TV, “TIMER REC STANDBY” starts flashing
on the TV screen 2 minutes before the programmed
start time.
TIMER PROGRAM EXTENSION
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
B
61 7/06 FRI
7:12
P
M
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
B
61 7/06 FRI
7:30
P
M
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
B
61 7/06 FRI 7:30
P
M
8:30
P
M
- -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
B
61 7/06 FRI 7:30
P
M
8:50
P
M
- -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
B
61 7/06 FRI 7:30
P
M
8:50
P
M
SP
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
T5208.QX33 01.3.24 1:39 PM Page 27