Oki 3100e - Manual (Page 31)

English
Chapter 3 - Network Setup 25
(m) Press the ESC key in [Service printers] to
end.
Setting up queue server mode
This network card can serve as a print server and
connect Print Queues. Set print server, print queue and
printer in the File Server in the same manner as
described in “Setting up queue server mode” on
page 25.
If the Print Server is not booted up on the file server
side, this network card when in AUTO or Queue Server
Mode is connected to the file server as a print server.
Note 1: To use the OKIPAGE 14i printer in Queue
Server Mode, you must not set the password
for the print server. If you set the password,
you will not be able to connect this network
card as a print server. To use the OKIPAGE
14i in Remote Printer Mode, you can
connect it even if the password is set for the
print server.
Note 2: This network card does not support banner
sheet printing in the Queue Server Mode.
NetWare 4.x and 5 bindery environment
To use the bindery service, set the bindery context in
the NetWare4.x and 5 environment. Also set the print
server and print queue in this bindery context.
Setting up bindery context
For setting the bindery context, you use the set
command in the system console of the NetWare server.
3100euGB.book Page 25 Friday, March 16, 2001 1:18 PM