Onkyo TX-SR875 - Manual (Page 53)

53
First Time Setup —Continued
Notes:
• Only FRONT can be assigned to the AUX 2 input
selector.
• The TUNER input selector cannot be assigned and is
fixed at the “- - -” option.
• When an HDMI IN is assigned to an input selector in
“HDMI Video Setup” on page 48, this input assign-
ment is automatically set to the same HDMI IN. And
in addition to the usual inputs (e.g., COAX1, COAX2,
etc.), you can also select HDMI inputs.
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.
Using the DIGITAL INPUT Button
Digital inputs can also be assigned to input selectors by
using the [DIGITAL INPUT] button on the AV receiver.
5 Press the [SETUP] button.
Setup closes.
SE
TUP
1 Press the input selector button
for the input selector that you
want to assign.
2 Press the [DIGITAL INPUT]
button.
The current assignment is displayed.
3 Press the [DIGITAL INPUT] but-
ton repeatedly to select an
option.
Available options are the same as for
the Digital Input menu. See step 4 on
page 52.
STANDBY/ON
MASTER VOLUME
CD TUNER TAPE CBL/SAT GAME/TV AUX 1 AUX 2 VCR/DVR DVD AUDIO SEL PURE AUDIO PHONO DISPLAY PUSH TO OPEN
STANDBY
READY
ZONE 2
ZONE 3
OFF TONE HDMI OUT
DIGITAL INPUT
ZONE 2
ZONE 3
LEVEL PHONES POWER
ON OFF
STEREO THX RT/PTY/TP MEMORY
LISTENING MODE
TUNING MODE SETUP
PRESET
TUNING
TUNING RETURN
ENTER
SETUP MIC
VIDEO S VIDEO DIGITAL
AUX 2 INPUT
AUDIO L R
CLEAR
1
2, 3
CD TUNER TAPE
CBL/SAT
GAME/TV AUX 1 AUX 2
VCR/DVR DVD
PHONO
DIGITAL INPUT
DIGITAL INPUT