Oki B 4300 - Manual (Page 18)

OPERATOR PANELS > 18
The secondary functions of the control button are activated after
turning the printer off line, then pressing and holding the switch for at
least two seconds before releasing. The secondary functions are as
follows:
> Printing the demo and menu pages.
> Printing any data held in the buffer after printing has been
cancelled.
The other functions of the control button are activated after turning
the printer off line then pressing and holding the switch for at least
five seconds before releasing. The other functions are as follows:
> Printing a cleaning page.
> Resetting the printer and clearing the buffer after printing has
been cancelled.
STATUS MONITOR
After installing the printer driver software onto your computer, the
Status Monitor is then installed to indicate what is happening to the
printer when it is being used. (See the chapter entitled “Printer
Drivers”.) This Status Monitor is also used to control and change the
various printer settings.
NOTE
Demo and menu pages can also be printed using the printer Status
Monitor.
NOTE
A cleaning page can also be printed using the printer Status Monitor.
NOTE
To reset the printer to the default settings of the manufacturer, the
control button is pressed and held down while the printer is switched on
with the main power switch. The LED indicators blink when the printer
has reset to the default settings.