Onkyo HT-RC370 User Manual
Page 19
19
En
Connect your components to the appropriate jacks. The default input assignments are shown below. See “Connection
Tips and Video Signal Path” for more information (
page 81).
✔: Assignment can be changed (
Note
*1
Do not connect the AV receiver’s USB port to a USB port on your computer. Music on your computer cannot be played through the
AV receiver in this way.
*2
Connect a turntable (MM) that has a built-in phono preamp to TV/CD IN, or connect it to PHONO IN with the phono preamp turned
off. If your turntable (MM) doesn’t have a phono preamp, connect it to PHONO IN. If your turntable has a moving coil (MC) type
cartridge, you’ll need a commercially available MC head amp or MC transformer to connect to PHONO IN. See your turntable’s
manual for details.
If your turntable has a ground wire, connect it to the AV receiver’s GND screw. With some turntables, connecting the ground wire
may produce an audible hum. If this happens, disconnect it.
*3
To select the multichannel input, select the BD/DVD input selector and see “Audio Selector” (
page 55). To adjust the
subwoofer sensitivity for the multichannel input, see “Subwoofer Input Sensitivity” (
*4
When you connect your personal computer to PC IN and select the PC input selector, the video of the personal computer is output
from the HDMI outputs. However, if you have assigned the HDMI inputs to the PC input selector, the AV receiver will output
signals received from the HDMI inputs instead of signals from PC IN. To have the signals output from PC IN, select “- - - - -” for
“PC” in the “HDMI Input” setting (
page 44).
• With connection , you can enjoy Dolby Digital and DTS. (To record or listen the audio in Zone 2 as well, use and
.)
• With connection , you can listen to and record audio from external components while you are in Zone 2.
• With connection , if your Blu-ray Disc/DVD player has both the main stereo and multichannel outputs, be sure to
connect to the main stereo.
■
How to record a video source
With the connections described above, you cannot record the videos through the AV receiver. See “Recording” about
connections for video recording (
No.
Jack/Port
Components
Assignable
USB, VIDEO
iPod/iPhone (video playback)
USB
*1
iPod/iPhone, MP3 player, USB flash drive
DIGITAL IN
COAXIAL
1 (BD/DVD)
Blu-ray Disc/DVD player
✔
2 (VCR/DVR)
VCR or DVD recorder/digital video recorder, RI
dock
✔
3 (CBL/SAT)
Satellite/cable set-top box, RI dock, etc.
✔
OPTICAL
1 (GAME)
Game console
✔
2 (TV/CD)
TV, CD player
✔
UNIVERSAL PORT
Universal port option dock (UP-A1 etc.)
ETHERNET
Router
MONITOR OUT
TV, projector, etc.
BD/DVD IN
Blu-ray Disc/DVD player
VCR/DVR IN
VCR or DVD recorder/digital video recorder, RI
dock
CBL/SAT IN
Satellite/cable set-top box, etc.
GAME IN
Game console, RI dock
PC IN
Personal computer
TV/CD IN
TV, CD player, cassette tape deck, MD, CD-R,
Turntable
*2
, RI dock
PHONO IN
Turntable
*2
COMPONENT
VIDEO
IN 1 (BD/DVD)
Blu-ray Disc/DVD player, RI dock
✔
IN 2 (CBL/SAT)
Satellite/cable set-top box, RI dock, etc.
✔
MONITOR OUT
TV, projector, etc.
Multichannel input
*3
DVD player, DVD-Audio, Super Audio CD-
capable player, MPEG decorder
PC IN
*4
Personal computer