Oki 8100e User Manual
Page 86
UNIX 86
Reset the network interface card settings to default and try to set a
temporary IP address. If you still have the problem after resetting the
network interface card, consult the network manager.
5.
Register the network card as a remote printer server.
Example: for host name C5300
a. Stop the print scheduler.
# usr/sbin/lpshut
b. Create the printer queue.
# /usr/sbin/lpadmin -p C5300_lp -v /dev/null \
m
netstandard -o dest=C5300:lp
-o protocol=bsd
c. Set the queue to accept PostScript print jobs.
# /usr/sbin/lpadmin -p C5300_lp -I postscript
d. Start the print scheduler.
# /usr/sbin/lpsched
e. Activate the print queue.
# /usr/sbin/accept C5300_lp
f.
Enable the print queue
# /bin/enable C5300_lp
To customise output, for example to add additional commands at the
start of each print job, you can edit a copy of the
netstandard model
file then add it using the
lpadmin command.
Example: for printer C5300_lp, with model file called C5300_model
# /usr/sbin/lpshut
# /usr/sbin/lpadmin
–p C5300_lp –m C5300_model
# /usr/sbin/lpsched