Using the remote control, Control mode buttons, Receiver/amplifier operation – Optimus 31-3042 User Manual

Page 47: The three, Buttons select the device you connected to the, Before operation, press, Selects the am or fm tuner band, Tunes to radio stations, Selects the fm reception mode, Adjusts the level of dsp or dolby virtual mode

Advertising
background image

24

Using the Remote Control

The remote control works up to a distance of about 23 feet, and within a 30-
degree angle on either side of the receiver. Point the control at the receiver’s
front panel and press the desired button(s).

Many buttons on the remote control work the same as buttons on the receiver’s
front panel. Use these buttons exactly as you would use the corresponding but-
tons on the receiver.

CONTROL MODE Buttons

The three

CONTROL

MODE

buttons select the device you connected to the

CON-

TROL

OUT

jack of the STAV-3770, CD player, VCR, or cassette deck.

Receiver/Amplifier Operation

Before operation, press

TUNER

to select receiver/amplifier operation.

STATION

Tunes to the next higher or lower memory location.

BAND

Selects the AM or FM tuner band.

FREQ

Tunes to radio stations.

FM MONO

Selects the FM reception mode.

CLASS

Selects the memory class.

DIRECT ACCESS

Allows direct input of the station frequency.

Number Buttons

Select the corresponding memory station. During Direct Access,
enter the station’s frequency.

TEST TONE

Sounds test tones from each speaker when pressed after

SUR-

ROUND

.

REAR LEVEL

+

Controls the sound level of the rear speakers when pressed after

SURROUND

.

CENTER MODE

Selects among the three center modes or 3CH Logic when
pressed after

SURROUND

.

CENTER LEVEL

+

Controls the sound level of the center speaker when pressed af-
ter

SURROUND

.

DELAY TIME

Sets the rear-channel delay for Dolby Pro Logic Surround and
Simulated Surround programs when pressed after

SURROUND

.

EFFECT

+

Adjusts the level of DSP or Dolby Virtual mode.

PRO LOGIC

Selects Dolby Pro Logic Surround.

DSP MODE

Selects the DSP mode; HALL, JAZZ, DANCE, THEATER 1, or
THEATER 2.

MUTING

Silences the receiver. Press again to restore the sound to its pre-
vious level.

VIRTUAL

Selects Dolby Virtual.

LOUD

Turns the loudness feature on and off.

FUNC

Selects a program source (VCR, PHONO, tuner, CD, or DVD/
LD). Repeatedly press until the display shows the desired pro-
gram source.

AUDIO/VIDEO

SYSTEM REMOTE

DIRECT

FUNC

VIRTUAL

RECEIVER

POWER

CONTROL

MODE

TUNER

FM

MONO

POWER

CLASS

DIRECT

ACCESS

TAPE

BAND

CD

LOUD

PRO LOGIC

SURROUND

DSP MODE

FREQ

0

7

8

9

4

5

6

1

2

3

MUTING

MASTER
VOLUME

CENTER

LEVEL

DISC

EFFECT

CENTER

MODE

DELAY

TIME

TEST

TONE

REAR

LEVEL

STATION

OSR

Receiver/
Amplifier
Buttons

RECEIVER POWER

TUNER

Advertising