Sylvania D3208 - Manual (Page 28)

To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
Lighting Controls
C
28
ILLUMATECH ™ LIGHTING CONTROLS • 600–1000 WATTS • 120 and 277V AC 60Hz
Commercial Grade Lighting Controls
IllumaTech Decora-Style Preset Slide Controls
All IllumaTech Preset Dimmers provide single-pole (one-location) and 3-way (multi-location) control when
used with a 3-way switch.
IllumaTech Colors—All IllumaTech Preset Slide Controls are available in Ivory (-I), White (-W), Almond (-T),
Light Almond (-T), Gray (-G), Black (-E), Brown (-B) and Red (-R). Devices come packaged with three
colors as indicated in the chart below. Color change Kits can also be ordered separately for every color.
IllumaTech Slide Contols—Single Pole and 3-Way
U R
DESCRIPTION CAT. NO. RATING COLOR*
IllumaTech Incandescent IPI06-1LZ 600W I + W + T
with LED Locator IPI06-1LX 120V AC 60Hz I + W + A
IllumaTech Incandescent IPI10-1LZ 1000W I + W + T
with LED Locator IPI10-1LX 120V AC 60Hz I + W + A
IllumaTech Electronic Low-Voltage IPE04-1LZ 400VA (320W) I + W + T
with LED Locator IPE04-1LX 120V AC 60Hz I + W + A
IllumaTech Magnetic Low-Voltage IPM06-1LZ 600VA (450W) I + W + T
with LED Locator IPM06-1LX 120V AC 60Hz I + W + A
IllumaTech Magnetic Low-Voltage IPIM10-1LZ 1000VA (800W) I + W + T
with LED Locator IPM10-1LX 120V AC 60Hz I + W + A
IllumaTech Advance Mark 7 ™ 0-10V IP710-DLZ 1200VA @ I + W + T
Fluorescent Dimming Ballast IP710-DLX 120V AC 60Hz, I + W + A
with LED Locator 1500VA @
277V AC 60Hz
IllumaTech Advance Mark 10 ™ Powerline IPX06-1LZ 600VA I + W + T
Fluorescent Dimming Ballast (no LED Locator) IPX06-1LX 120V AC 60Hz I + W + A
IllumaTech Advance Mark 10 ™ Powerline IPX10-1LZ 1000VA I + W + T
Fluorescent Dimming Ballast (no LED Locator) IPX10-1LX 120V AC 60Hz I + W + A
IllumaTech Advance Mark 10 ™ Powerline IPX06-7LZ 600VA I + W + T
Fluorescent Dimming Ballast (no Locator LED) IPX06-7LX 277V AC 60Hz I + W + A
IllumaTech Advance Mark 10 ™ Powerline IPX12-7LZ 1200VA I + W + T
Fluorescent Dimming Ballast (no Locator LED) IPX12-7LX 277V AC 60Hz I + W + A
IllumaTech Quiet Fan Speed Control IPF01-1LZ 1.5 Amps I + W + T
with LED Locator IPF01-1LX 120V AC 60Hz I + W + A
IllumaTech Fan Speed Control IPF05-1LZ 5 Amps I + W + T
with LED Locator IPF05-1LX 120V AC 60Hz I + W + A
IllumaTech Color Change Kit (with LED window) IPKIT-00 — I, W, A, T, G, E, B, R
with LED Locator
IllumaTech Color Change Kit (no LED window) IPKIT-0N — I, W, A, T, G, E, B, R
with LED Locator
IllumaTech Color Change Kit for IPQFK-00 — I, W, A, T, G, E, B, R
Quiet Fan Speed Control
See Page C8 for more information on Leviton Power Extenders
4.15 (105.4)
2.68 (68.1)
1.75 (44.5)
2.12 (53.8)
1.41
(35.8)
3.28 (83.3)
IPI10-1LZ
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to
each phase. Consult Leviton Techline if problems persist.
CAUTION ON RETROFITS: When retrofitting Mark 10 ™ Powerline dimming ballasts into fixtures that originally had Instant
Start ballasts, the sockets MUST be replaced with Rapid Start sockets to allow proper dimmer operation and prevent dam-
age to the dimming ballast. Refer to the instructions provided with the ballast and the Leviton Mark 10
™ dimmer.
Use Leviton Power Extenders to extend
the load capacity of box-mounted dim-
mers. Leviton Power Extenders are
available for incandescent, magnetic
low-voltage, electronic low-voltage,
Advance Mark 10
™ Powerline fluores-
cent dimming ballasts or equivalents,
and 0–10 VDC dimmable fluorescent
ballasts such as Advance Mark 7
™
0–10V, OSRAM Sylvania Quicktronic
Helios or equivalent ballasts.
SPECIFICATIONS AND FEATURES
• Fluid slide movement allows fine adjustment of light
level with minimum effort
• Captured, wrap-around slide bar stays in place and
cannot fall off during use
• Provide easy-to-use pushbutton switch with locator
LED conveniently positioned on it, making the
pushbutton easier to find in the dark
• Provide single-pole (one-location) and multi-loca-
tion lighting control when used with a 3-way switch
• Attractive Decora styling blends with any interior
• Compatible with Decora screwless and Decora
standard designer wallplates
• Power failure recovery ensures retention of last
setting before power interruption
• Built-in radio/TV interference filter
• Quiet 1.5 Amp Fan Speed Controls are ideal for
libraries, study rooms and any area where ceiling
fan noise could become distracting. Full range
5-amp fan speed controls also available
• Color change kits feature a self-aligning mechanism
that automatically connects it to internal slider
• Snap-On Color Change Kits allow color changes on
any device, eliminating the need to stock a separate
device for every available color
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Five-Year Warranty
*COLOR
IllumaTech Preset Controls come packaged with
three colors. Controls with suffix (-Z) include Ivory,
White and Light Almond; controls with suffix (-X)
include Ivory, White and Almond. Color Change Kits
are available in all colors. Add suffix to the Color
Change Kit catalog number as follows: Ivory (-I),
White (-W), Almond (-T), Light Almond (-T), Gray
(-G), Black (-E), Brown (-B) and Red (-R).
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com