Oricom PMR3000 - Manual (Page 12)

12
4. Plug one end of the AC power adaptor into the charging pod
and then the AC adaptor into the power socket.
5. Slide the radios into the charging pod ensuring the charging
contacts line up. The red lights on the charge pod glow when
radios are properly inserted.
6. The batteries will be fully charged within 14 hours.
IMPORTANT NOTE
1. When moving between hot/cold environments do not charge
the battery until the battery temperature acclimates (usually
about 20 minutes).
2. Batteries can cause property damage and/or bodily injury such
as burns if a conductive material-like jewellery, keys or chains
touch exposed terminals.
3. The conductive material may complete an electrical circuit
(short circuit) and become quite hot.
4. Exercise caution in handling any battery, particularly when
placing it inside a bag, pocket, purse or any container with
metal objects.
Attaching the belt clips
Attaching the belt clips (2 included)
Each radio is supplied with a
belt clip.
To attach, align belt clip post
with hole in the back of the
radio and gently push until it
clicks into place.
Removing the belt clip
To remove, push release tab on top of belt clip down to release
catch and pull belt clip
from the back of the radio.
Getting Started