Enjoying audio sources —continued, Using the tone controls, Muting the a-933 (remote controller only) – Onkyo A-933 User Manual

Page 18: Using headphones, Selecting tone or direct mode, Adjusting the super bass, Adjusting the bass, Adjusting the treble

Advertising
background image

18

Enjoying Audio Sources

—Continued

Muting the A-933 (remote controller only)

You can temporarily mute the output of the A-933.

Using Headphones

You can connect a pair of stereo headphones (1/4-inch
phone plug) to the A-933’s PHONES jack for private
listening.

Notes:

• Always turn down the volume before connecting your

headphones.

• All connected speakers are turned off while the head-

phones plug is inserted in the PHONES jack.

• The headphones output no sound while the MAIN IN

function is on.

While the MAIN IN function is on, the A-933’s tone
controls have no effect.

Selecting Tone or Direct Mode

The [TONE(R)/DIRECT(G)] button is
used to select Tone or Direct mode.
In Tone mode, the tone controls can be
used to adjust the sound, and the
TONE/DIRECT indicator lights up red
(R).
In Direct mode, the tone controls are bypassed, so you
can enjoy a pure sound. The TONE/DIRECT indicator
lights up green (G).

Adjusting the Super Bass

The SUPER BASS control
adjusts very-low bass sounds.
Turn it up to make them louder.
Normally, it should be fully
turned down.

Adjusting the Bass

The BASS control adjusts bass
sounds. Turn it up to make them
louder. Turn it down to make them
quieter. Normally, it should be set
midway.

Adjusting the Treble

The TREBLE control adjusts treble
sounds. Turn it up to make them
louder. Turn it down to make them
quieter. Normally, it should be set
midway.

2

Start playback on the selected
component.

3

To adjust the volume, use the
A-933’s Volume control, or the
remote controller’s VOLUME
[

]/[

] buttons.

Turn VOLUME control clockwise to
increase the volume or counterclock-
wise to decrease the volume.

1

Press the remote controller’s
[MUTING] button.

The A-933 is muted, and the
STANDBY indicator flashes green.

To unmute the A-933, press the
[MUTING] button again.

Notes:

• The Mute function will be cancelled

if the remote controller’s VOLUME
buttons are pressed or the A-933 is
set to Standby.

• When using the A-933 as a power

amplifier (MAIN IN function), the
Muting function has no effect.

VOLUME

VOLUME

A-933

Remote

controller

MUTING

STANDBY/ON

ON(G)

STANDBY(R)

POWER

PHONES

SUPER BASS

SPEAKERS

B

A

OFF

ON

PHONES

Using the Tone Controls

TUNER

PHONO

C D

M D

TAPE /CDR

LINE

STANDBY/ON

POWER

PHONES

TO N E ( R )

DIRECT

(G )

MAIN IN

SUPER BASS

BASS

MAX

TREBLE

SPEAKERS

B

A

OFF

ON

STANDBY(R)

ON(G)

TREBLE

BASS

SUPER BASS

TONE(R)/DIRECT (G)

TONE(R)

DIRECT(G)

MAX

SUPER BASS

BASS

TREBLE

Advertising