Oki BMG7012 - Manual (Page 6)

BMG7011 and BMG7012 User’s Guide Rev. 1.9
© Copyright, 2004 Oki Network Technologies. All Rights Reserved 1
1. Overview
The BMG7011 and BMG7012 are external standalone devices that can provide cost effective voice communication
over an IP Network. The BMG7011 and BMG7012 gateways are available in one and two channel models
(respectively). Both models connect directly to analog phones, fax machines, and the IP Networks without the need for
additional equipment. With the Ethernet interface of the VoIP gateways connected to another device with a WAN
interface (e.g. xDSL, cable modem...), the BMG7011 and BMG7012 VoIP gateways provide toll quality voice
communication and reliability for the user.
1.1 Package Contents
Carefully unpack the shipping package containing the VoIP gateway and make sure that you have the following items.
If you find anything missing, mismatched or damaged, promptly contact your dealer who you purchased your product
from for assistance.
One VoIP Residential Gateway
One RJ-11 telephone line for first telephone
One RJ-11 telephone line for second telephone (optional)
One RJ-11 telephone line for PSTN backup use (optional)
One RJ-45 Ethernet cable
One power adapter with power plug
One package contents sheet
1.2 System Requirements
One RJ-45 Broadband Internet connection via cable, ADSL, or wireless modem, etc.
One PC with 10Mbps, 100Mbps, or 10/100 Mbps Ethernet card installed or Ethernet port for unit management
purposes.
TCP/IP protocol for each PC
Microsoft Internet Explorer 4.0 or later (5.0 is strongly recommended for web configuration)
One or two standard touch-tone telephone(s)
1.3 Features
KEY FEATURES
• BMG7011 - 1 Channel
• BMG7012 - 2 Channel
• Integrated Routing Capabilities
• Call Control Protocols H.323, SIP, MGCP