Olympus WS-300M - Manual (Page 31)

31
2 1 Press the
+
or
–
button in the sub
menu screen, and select the “Back
Space”.
See ☞ P.38, 75 regarding the sub menu.
2 Press the OK or 9 button.
The auto backspace review setup
process begins.
3 Press the
+
or
–
button to choose
from “Off”, “1 Sec” and “2 Sec”.
Off: Perform normal cueing.
1 Sec: Start playback from 1 second
before.
2 Sec: Start playback from 2 seconds
before.
4 Press the OK or 0 button to
complete the setup screen.
5 Press the STOP button to close the
menu.
6 Press the 0 button while the file
is being replayed.
Playback starts at the set point of seconds
before.
Auto Backspace Review (Back Space)
Auto Backspace Review (Back Space)
......................................................................................................................................................
Note
• If “1 Sec” or “2 Sec” is set at the previous playback, and even though the 0 button is pressed, it does not
reverse skip to the cue or the index mark position. Reverse skip is executed for only the set time (1 or 2
seconds).
To ease the reviewing of a voice file you can set an auto backspace for either 1 or 2 seconds, so
you will listen to the last phrase repeatedly.
2
1,3
6
5
4