Optoma Optoma EP725 - Manual (Page 12)

12
E
nglish
Installation
Adjusting the Projected Image
Adjusting the Projector Height
Tilt Adjusted wheel
Elevator Foot
1
2
3
Elevator Button
The projector is equipped with an elevator foot for adjusting the
projector height.
To raise the projector:
1. Press the elevator button
Π.
2. Raise the projector to the desired display angle

, then
release the button to lock the elevator foot into position.
3. Use
Ž
to fine-tune the display angle.
To lower the projector:
1. Press the elevator button.
2. Lower down the projector, then release the button to lock
the elevator foot into position.
3. Use
Ž
to fine-tune the display angle.