Olivetti 503206 - Manual (Page 40)

CHAPTER 5 36
Copying/Scanning Problems
Meaning of the LED Indicators on the Front Panel
Problem Possible Cause Corrective Action
The printer or scanner makes
unusual noises during operation. • Turn off the printer and then
turn it back on again by
pressing the ON/OFF button.
Horizontal streaks are printed. • The ink cartridges are dirty. • Clean the ink cartridges. See
"Cleaning the Ink Cartridge
Nozzles".
A completely black copy is
output. • Faulty Contact Image Sensor. • Contact the field engineering
service.
Problem Possible Cause Corrective Action
The black ink LED on the front
panel is flashing. • The black ink cartridge is
nearly out of ink. • You can continue to print
until this LED remains
illuminated.
The black ink LED on the front
panel is illuminated. • The black ink cartridge is out
of ink. • Replace the black ink
cartridge. For information,
see "Replacing the Ink
Cartridges".
The colour ink LED on the front
panel is flashing. • The colour ink cartridge is
nearly out of ink. • You can continue to print
until this LED remains
illuminated.
The colour ink LED on the front
panel is illuminated. • The colour ink cartridge is
out of ink. • Replace the colour ink
cartridge. For information,
see "Replacing the Ink
Cartridges".
The Paper LED on the front panel
is illuminated. • You launched a print or copy
job and there is no paper
loaded in the printer. • Load paper. For information
see "Loading Paper".
• The size of the paper that is
loaded does not match the
paper size that you selected
from the Toolbox application
or from the PictBridge-
compliant digital camera
connected to the printer. • Load the correct paper. For
information see "Loading
Paper".
Continues ....
• The size of the paper loaded
is not the A4 size needed to
print the ink cartridge
alignment page after
changing the ink cartridges. • Load the correct paper. For
information see "Loading
Paper".