Onkyo DV-L5 - Manual (Page 14)

14
SN 29343149 DV-L5E
Connecting to an Amplifier
(To Enjoy the Sound Advantage of the DVD Player)
Before connecting
• Refer to the instruction manual of the amplifier.
• When you connect the DVD Player to the amplifier, be sure to turn off
the power and unplug both units from the mains before making any
connections. Otherwise, the speakers may be damaged.
• Connect the plugs securely.
■ Making a digital connection with
the amplifier
If your ampolifier has a digital input jack, be
sure to connect it to either DIGITAL OUTPUT
OPTICAL or COAXIAL jack on the DVD player.
Note
DO NOT connect to the AC-3RF input (e.g. of a
Dolby Digital receiver) which is reserved only for
video disc players.
■ Making the analog connection
with the amplifier
If your amplifier has no digital audio input, you
can make the analog connection. If the
amplifier has a Dolby Pro Logic decoder, you
can reproduce the Dolby Pro Logic surround
sound.
An amplifier with a Dolby
Digital/DTS/MPEG1/MPEG2
decoder or 2 channel digital
stereo
Although you can reproduce the DVD Player’s sound from the TV speakers with the connections on the opposite page,
connecting with an amplifier provides you high quality dynamic sounds.
To reproduce Dolby Digital surround, MPEG1 audio, MPEG2 audio, and DTS surround sound, you need to connect to an
amplifier with a Dolby Digital, MPEG1 audio, MPEG2 audio, and DTS decoder respectively.
An amplifier with no
digital connection
: Signal flow
Optical fiber connection cable
To Digital optical jack
Incomplete
Insert completely
L
MONO
R
VIDEO OUTPUT
Y
P B
P R
OPTICAL COAXIAL
REMOTE
CONTROL
ANALOG
OUTPUT
DIGITAL
OUTPUT
VIDEO S VIDEO COMPONENT
Stereo audio
connection cable
To audio input
Coaxialconnection cable
To Digital coaxial jack
z cable
To zconnector
z cable
To zconnector
DO NOT connect the
mains lead at this time.
Be sure to set the digital output setting after connection
using the Setup Navigator explained in “Setting Up the
Player” starting on page 16 or the function setting menu
explained in “Adjusting Audio and Video Settings”
starting on page 38.
Notes
• The remote controller supplied with Onkyo amplifier can be used
to operate the DVD player.
• The function of the upper and lower z connectors are the same.
Connect to either one.
L (White)
R (Red)