Oregon MP 120 - Manual (Page 8)

5
EN
CONNECTING THE PLAYER TO YOUR COMPUTER /
CHARGING THE BATTERY
To connect the player to your computer using the supplied USB cable:
NOTE: Make sure you turn off the player before connecting to the PC.
Once connected the player's built-in battery will automatically begin
charging. "READY" will show on the LCD.
When the battery is fully charged after approximately 2-3 hours on a
continuous charge, the battery icon shows
. Please disconnect
the player when charging is finished unless you are transferring files.
The battery status indicators are as follows:
NOTE: When the low battery indicator shows
, recharge the battery
as soon as possible. When the battery icon shows , this indicates
the battery is about to run out of power within a few seconds minutes.
NOTE: Charging time may vary depending on the computer's USB
usage status.
FILE TRANSFER
After connecting your MP3 player to the computer, the computer will
detect and identify the device as a removable storage drive, allowing
you to drag and drop all forms of data files between your computer
and your player.
1. Double click the My Computer icon.
2. Double click the drive letter (i.e. Removable Disk (H:)) of your
player assigned by the computer.
PC USB
Low Medium Full
MP120 Eng R3 OP 8/25/04, 11:55 AM 5
¶´ƒ