Oki C 130n - Manual (Page 39)

39 - C130n User’s Guide
Quality Menu
Note All factory default values are shown in bold.
REPLACE
TONER BLACK Settings YES/NO
If YES is selected, the carousel rotates to the black toner
cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 75.
CYAN Settings YES/NO
If YES is selected, the carousel rotates to the cyan toner
cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 75.
MAGENTA Settings YES/NO
If YES is selected, the carousel rotates to the magenta
toner cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 75.
YELLOW Settings YES/NO
If YES is selected, the carousel rotates to the yellow toner
cartridge, so that it can be replaced.
For details on replacing the toner cartridge, refer to
“Replacing a Toner Cartridge” on page 75.
REMOVE
ALL Settings YES/NO
If YES is selected, the printer enters REMOVE ALL mode.
This mode is used when replacing all toner cartridges at
the same time.
For details on replacing all toner cartridges, refer to
“Replacing All Toner Cartridges at the Same Time” on
page 82.
TONER
OUT
ACTION Settings STOP /CONTINUE
If STOP is selected, printing stops when the toner cartridge is empty.
If CONTINUE is selected, printing continues even if the toner cartridge is
empty.