Olevia 4-Series - Manual (Page 11)

09
Identifying Front and Rear Panels
Rear Panel
TV Installation and Connection Guide
NOTE: The component inputs have a superior quality of picture than the S-Video or AV
(composite video) inputs.
Power Connections
The power cord connects here.
1
AC In
Computer / TV Signal Connections 2
VGA/Audio Input
(PC) Port Used for analog RGB signals from a personal computer. VGA has one set of Audio R/L inputs.
Audio Input To send an AV receiver or other equipment's connected audio signals to the TV
Used for audio output to earphone.
USB Service Port
Only for Service Technician use, not an interface for other devices.
(5 RCA jacks) Used to connect A/V equipment with component video outputs, such as
a DVD player, Digital Satellite Receiver, or compatible Video Game System.
Component
Video
AV (Composite Video: 3 RCA jacks): Used to connect a VCR, Super VHS (S-VHS),
DVD player, or other video devices to the TV.
HDMI/DVI
S-Video
Video R
L
Pr/Cr
Pb/Cb
Y
R
L
S-Video : (1 DIN and 2 RCA jacks) Used to connect video devices to the TV.
However, they have a better quality of picture than a composite video signal.
OR
Used to connect digital video equipment with a HDMI/DVI output.
NOTE: Preferred connection for HDMI/DVI Satellite or Set-Top-Box . equipment
To receive signals from VHF / UHF antennas or a cable system
(For TV Models Only)
R L
Earphone
RS232 Service
Port
To download some information from website to TV for user
RF Terminal
OR
As a computer input with VGA to RCA Adapter.
R L
Warning !
This RS232 control port is for service purpose only, and should be used by trained
serviceman only. Any random connection may cause damage to this unit.