Outlaw Audio RR 2150 - Manual (Page 27)

7 RR 2150 Stereo RetroReceiver
Owner’s Manual
RR 2150 Specifications
All features and specifications are subject to change without notice or liability to upgrade
existing units.
Outlaw Audio and the Outlaw Audio logo are registered trademarks of Outlaw Audio, LLC.
Any trademark not acknowledged is recognized as the property of the respective owner.
RR 150 Specifications
Audio Section
Continuous Average Power 100 Watts/channel (8 Ω, 20Hz to 20kHz, <0.03% THD)
both channels driven 160 Watts/channel (4 Ω, 20Hz to 20kHz, <0.03% THD)
Input Sensitivity/Impedance
High Level 200mV/47k Ω
MM Phono 3.3mV/47k Ω
MC Phono 0.6mV/47k Ω
Bass Management
High-Pass Slope Adjustable 60Hz/80Hz/100Hz/Bypass
12 dB/octave (2nd order)
Low-Pass Slope 12dB/octave (2nd order)
Tone Control
Bass Center Frequency/Range 50Hz ± 6.5dB
Treble Center Frequency/Range 1KHz ± 6.5db
Frequency Response @ 1W 20Hz to 20kHz (+ 0dB/– 0.5dB)
S/N Ratio (IHF-A) 96dB unweighted
Transient IMD Unmeasurable
FM Tuner Section
Frequency Range 87.5 – 108MHz
Usable Sensitivity (IHF) 12dBf
S/N Ratio
Mono 75dB
Stereo 70dB
Stereo Distortion 0.24%
Stereo Separation @ 19kHz 37dB
Selectivity 70dB ±10kHz
AM Tuner Section
Frequency Range 530 – 1710kHz
Usable Sensitivity 500 µV/M
S/N Ratio >54dB
Selectivity >25dB ±10kHz
General
Supply Voltage 120V, 60Hz only
Power Consumption
Idle 5W
@ Full Load 400W max.
Trigger Output Sequential Delay 50 mA @ 12 VDC
Dimensions (W x H x D) 17.1 x 5.75 x 15.0 inches
Weight 27 lbs.