Outlaw Audio 1070 User Manual

Page 9

Advertising

Model 1070 7.1 Channel Surround Sound Receiver

Owner’s Manual

RP Preamp audio outputs (see pages 23-24)

Variable outputs for connecting to an external power amplifier to your
system while still using the speakers connected to the loudspeaker out-
puts. If desired, an external amplifier with higher power than the Model
1070’s internal amp–such as one of Outlaw’s own amplifiers–can be
connected to the Model 1070 using these jacks. Alternatively, an external
amp can be connected here to drive additional speakers in a remote
location, such as a patio or second room.

RP DVI inputs (see pages 17-20, 25)

These digital video connections provide the best possible picture when
using a DVI- or HDMI-equipped video sources. (Use a DVI-to-HDMI
adapter or dual-purpose DVI to HDMI cables such as those available
from Outlaw Audio.)

RP DVI output (see pages 20 and 25)

When DVI or HDMI sources are connected to the Model 1070’s DVI Inputs,
connect this jack to a DVI equipped video display, or use an adaptor or
dual purpose cable to connect it to an HDMI display. Analog video sources
and on-screen menus do not appear on the DVI output.

RP5 MAIN POWER button (see pages 26 and 37)

Connects and disconnects the Model 1070 from AC power. When this
switch is on, the Standby/On indicator on the front panel illuminates.
When it is off, all power is cut and the front STANDBY/ON switch will
not function.

RP6 AC input (see pages 23 and 49)

Connect the supplied AC power cord here. Do not use standard IEC type
power cords.

Model 1070 Rear Panel

Model 1070 Rear Panel

Advertising

Popular Brands

Popular manuals