Connecting ac power, Installing a back-up battery – Optimus CR-319 User Manual

Page 2

Advertising
background image

2

CONNECTING AC
POWER

Plug the clock radio’s power cord into
a standard AC outlet. The display
flashes

12:00

until you set the time.

INSTALLING A BACK-UP
BATTERY

Your clock radio has a back-up power
system that operates the clock and
alarm during a power failure. The dis-
play turns off, but the clock keeps run-
ning for at least 8 hours (depending on
battery strength), and the alarm
sounds at the alarm time for at least
10 minutes.

The Battery Sentinel indicator, a small
red dot at the bottom right of the dis-
play, appears if the battery is not in-
stalled or needs to be replaced.

Your clock radio requires a 9-volt bat-
tery (not supplied) for its back-up pow-
er system. For the best performance,
we recommend an alkaline battery,
such as RadioShack Cat. No. 23-553.

Caution: Use only a fresh battery of
the required size and recommended
type.

Note: To prevent unnecessary drain
on the battery, install it only after con-
necting the clock radio to AC power.

1. Push the battery compartment

latch and pull off the compartment
cover.

2. Snap the clock radio’s battery

contacts onto the battery termi-
nals, then insert the battery into
the compartment. The Battery
Sentinel indicator turns off.

3. Replace the cover.

Caution: Never leave an old or weak
battery in the clock radio. It could leak
and damage the clock radio’s elec-
tronic parts.

Warning: Always dispose of an old
battery promptly and properly. Do not
bury or burn it.

(il-

(il-

(il-

12-1619.fm Page 2 Monday, July 12, 1999 9:05 AM

Advertising