Preparing the camera, 13 en, Inserting the battery – Olympus SZ-30MR User Manual

Page 13

Advertising
background image

13

EN

Preparing the Camera

Preparing the Camera

Inserting the battery

1

2

Insert the battery as illustrated with the C mark

toward the battery lock knob.
Damage to the battery exterior (scratches, etc.) may
produce heat or an explosion.

Insert the battery while sliding the battery lock knob in

the direction of the arrow.

Slide the battery lock knob in the direction of the

arrow to unlock, and then remove the battery.

2

1

Battery/card compartment lock

Battery/card
compartment cover

2

1

Battery/card compartment lock

Battery/card
compartment cover

Battery lock
knob

Battery lock
knob

Turn off the camera before opening the battery/card

compartment cover.

When using the camera, be sure to close the battery/

card compartment cover.

3

Charging the battery and setting up

using the supplied CD

Connect the camera to the computer to charge the battery
and use the supplied CD for setup.

User registration using the supplied CD and

installation of [ib] computer software is available on
Windows computers only.

The camera battery can be charged while the camera is
connected to a computer.

The indicator lamp lights during charging and turns
off when charging is complete.

Charging takes up to 4.0 hours.

If the indicator lamp does not light, the camera is not

correctly connected or the battery, camera, computer,
or USB cable may not be functioning as expected.

We recommend that you use a computer equipped

with Windows XP (Service Pack 2 or later), Windows
Vista, or Windows 7. See “Charging the battery with
the included USB-AC adapter” (p. 16) if you are using
a different computer or wish to charge the battery
without using a computer.

2

1

2

1

Advertising