Oakley O ROKR Pro - Manual (Page 9)

9
INDICATOR LIGHT
The indicator light on O ROKR Pro provides the following information:
DURING PAIRING The light is solid red. It to flashes green ten times when pairing is successful.
DURING CHARGING
Solid green = fully charged
Solid amber = 99% to 50% charged
Solid red = 49% to 0% charged
WHILE NOT CONNECTED TO A DEVICE The light flashes twice in red every 4 seconds.
WHILE POWERING UP The light flashes red > amber > green > green.
WHILE POWERING DOWN The light flashes green > amber > red > red.
WHILE WIRELESSLY CONNECTED
TO A DEVICE
The light flashes every 4 seconds:
Green indicates 100% to 67% charge remaining.
Amber indicates 66% to 34% charge remaining.
Red indicates 33% to 0% charge remaining.
Note the following:
• Bluetooth Sniff Mode technology ensures that power usage is minimized.
• The only time O ROKR Pro does not use power is when it is completely turned off. However, even when
not used, the internal rechargeable battery gradually loses power over time and requires recharging.
DUAL HIGH/LOW TONE EVERY 60 SECONDS
Low battery.
NO AUDIBLE TONES; DETERIORATING
AUDIO QUALITY; SKIPPING MUSIC
Out of range.
(Move O ROKR Pro closer to your phone or Bluetooth enabled audio device.)
DUAL HIGH/LOW TONE
Voice tag not recognized.
(The name of the person you want to dial was not recognized.)
SINGLE HIGH TONE Enter pairing mode. Pairing is confirmed.
RING TONE Incoming call.
FOUR TONES, LOW TO HIGH
O ROKR Pro is turned on. FOUR TONES, HIGH TO LOW
SINGLE MEDIUM TONE EVERY 20 SECONDS Microphone is muted.
O ROKR Pro is turned off.
SINGLE LOW TONE
Initiate voice activation.
(Speak the name of the person you want to dial.)
SINGLE HIGH TONE DURING
VOLUME ADJUSTMENT Maximum or minimum volume level has been reached. Phone mode only.
AUDIBLE INDICATORS
Sound tones provide the following information: