Olympus DM-420 - Manual (Page 29)

9
2
To EAR jack
REC button
PLAY button
Re
co
rd
in
g • [ ` ] will appear on the display.
• Stop recording and the file that was just
recorded will be played back.
Pause
While the recorder is during recording
mode, press the RECs button.
• [5] will appear on the display.
• The recorder will time out after 120
minutes when left in “Rec Pause”.
Resume Recording:
Press the RECs button again.
• Recording will resume at the point of
interruption.
To quickly check on the recorded contents
While the recorder is during
recording mode, press the PLAY `
button.
Listening while audio is recorded
If you start recording after inserting the
earphone into the EAR jack on the recorder,
you can hear the sound being recorded. The
recording monitor volume can be adjusted by
pressing the + or − button.
Connect the earphone to the EAR jack
on the recorder.
• After recording has started, you can hear
the sound being recorded through the
earphone.
• When [Folder Full] appears, the recorder
will not be able to record anymore. Delete
any unnecessary files before recording any
further (☞ P.42).
• Recorder will not be able to record
anymore when [Memory Full] appears.
Delete any unnecessary files before
recording any further (☞ P.42).
• We recommend formatting the record
media in the recorder before recording
(☞ P.71).
Recording