Olivetti D-COLOR P26 - Manual (Page 115)

Menu functions> 115
PPR
EMULATION
This menu controls settings effective when the printer is
operating in PPR emulation mode.
I TEM S ETTINGS E XPLANATION
CHARACTER
PITCH 10 CPI; 12 CPI; 17
CPI; 20 CPI;
PROPORTIONAL Specifies character pitch in IBM
PPR emulation.
FONT
CONDENSE 12CPI - 20CPI;
12CPI - 12CPI Specifies 12CPI pitch for Condense
Mode.
CHARACTER
SET Set 1; Set 2 Specifies a character set.
SYMBOL SET IBM 437 Specifies a symbol set.
LETTER 0
STYLE Disable; Enable Specifies the style that replaces
9BH with letter o and 9DH with a
zero
ZERO
CHARACTER Normal; Slashed Sets the zero to be slashed or
unslashed.
LINE PITCH 6 LPI; 8 LPI Specifies the line spacing.
WHITE PAGE
SKIP OFF / ON Selects whether blank pages are
printed or not.
CR FUNCTION CR / CR+LF Selects whether a received
carriage return character (0Dh)
also causes a line feed.
LF FUNCTION LF / LF+CR Selects whether a received line
feed character (0Ah) also causes a
carriage return.
LINE LENGTH 80 COLUMN; 136
COLUMN
Specifies the number of characters
per line.
FORM
LENGTH 11 Inch; 11.7 Inch
12 Inch Specifies the length of paper.
TOF
POSITION 0.0 INCH - 1.0
Inch Specifies the distance of print from
the top edge of the paper.
LEFT MARGIN 0.0 Inch - 1.0 Inch Specifies the distance of print from
the left hand edge of the paper.
FIT TO
LETTER Disable; Enable Sets the printing mode that can fit
print data, equivalent to 11 inches
(66 lines), in the LETTER-size
printable area.