Selecting a sound source, Press multi-ch input button on the remote contr, Press the ch sel button to select the desired s – Onkyo TX-DS474 User Manual

Page 17: Use the level ¹/† button to change the volume l, Press the input selector button (dvd) repeatedl

Advertising
background image

17

Selecting a sound source

Follow the steps below to adjust the level of each speaker if you
have selected MULTI-CH INPUT.

1. Press MULTI-CH INPUT button on the remote controller.

You cannot select any Surround mode.

2. Press the CH SEL button to select the desired speakers.

3. Use the LEVEL

π

/

button to change the volume level of

the speakers.

You can adjust the volume level of each speaker individually. Adjust
the level while listening to the sound in the listening position.
You can adjust the level of the front, center, and surround speak-
ers in the range between –12dB and +12dB.
You can adjust the subwoofer level in the range between –30dB
and +12dB.

Either a digital or analog device can be connected to the digital
connector. Follow the steps below to select digital or analog
according to the type of the connected device.
Assume that you have connected a DVD player to the DIGITAL 1
connector.

1. Press the Input Selector button (DVD) repeatedly to select

“DVD DIG1.”

Pressing the DVD button repeatedly changes the display as
shown in the illustration on the left.
ANLG : Analog input
DIG1 : Digital input (DIGITAL 1 (OPTICAL))
DIG2 : Digital input (DIGITAL 2 (COAXIAL))
If an analog device is connected, press the Input Selector button
to select “ANLG.”
You can switch between digital and analog for the DVD, VIDEO-
1, 2, and CD input sources.

To cancel a digital input assignment, press the corresponding input
selector button until “ANLG” is displayed.
Even when the digital inputs are used, the analog connecting cables
must be left in place. Otherwise, the audio output from TAPE OUT
and VIDEO-2 will not work. (See page 7.)

Warning:

Do not play CD-ROM discs that contain computer data as they
may damage the speakers when the sound is amplified by the
receiver.

When Multi channel input is selected as a source

Switching between digital and analog inputs

DVD ANLG

DVD DIG1

DVD DIG2

1

DVD

DIGITAL 1

(OPTICAL)

DIGITAL 2

(COAXIAL)

DVD Player

TX-DS474

2

DIGITAL 1

1

2

MULTI-CH

INPUT

POWER

SLEEP

DIMMER

SUR

MODE

VIDEO-1 VIDEO-2

TAPE

DVD

C D

C D

DVD

TUNER

TUNER

PHONO

INPUT SELECTOR

DISC

TAPE

VOLUME

LEVEL

CH SEL

PRESET

MUTING

TEST

TONE

MULTI-CH

INPUT

REMOTE CONTROLLER

GROUP

RC-385S

LEVEL

CH SEL

TEST

TONE

POWER

SLEEP

DIMMER

SUR

MODE

VIDEO-1 VIDEO-2

TAPE

DVD

C D

C D

DVD

TUNER

TUNER

PHONO

INPUT SELECTOR

DISC

TAPE

VOLUME

LEVEL

CH SEL

PRESET

MUTING

TEST

TONE

MULTI-CH

INPUT

REMOTE CONTROLLER

GROUP

RC-385S

LEFT

L-SUR

CENTER

RIGHT

R-SUR

SUBWOOFER

Advertising