Olicom BT202BIL01 User Manual

Olicom Hardware

background image

BT202BIL01 Guideline

Bluetooth Access Point with Broadband Router

Quick Start Guide

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against radio interference in a

commercial environment. This equipment can generate, use and radiate radio

frequency energy and, if not installed and used in accordance with the

instructions in this manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause interference, in which case the user, at his own expense, will be

required to take whatever measures are necessary to correct the interference.

CE Declaration of Conformity

This equipment complies with the requirements relating to electromagnetic

compatibility, EN 55022/A1 Class B, and EN 50082-1. This meets the essential

protection requirements of the European Council Directive 89/336/EEC on the

approximation of the laws of the member states relation to electromagnetic


This Quick Start Guide can help you setup up your PAN router quickly, please

following steps for Bluetooth PAN router setup.

1. Plug-in your ethernet cable in to this router, then plug in the power jack.

Note: The included power adapter is DC 6V/1A, Using wrong type

of power adapter may cause this product damage.