Sylvania DVL1000G - Manual (Page 18)

– 18 – EN
Functions
DISPLAY Setting B
ENTER
4
DISPLAY
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
PROGRESSIVE MODE AUTO1
FORMAT RGB
RGB RANGE
NORMAL
ENTER
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 17.
Select the desired item.
DISPLAY menu
5
TV ASPECT: QUICK
(Default: 4:3 LETTER BOX)
See Hint on the right.
TV ASPECT
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
16:9 SQUEEZE
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
PROGRESSIVE
OFF
PROGRESSIVE MODE AUTO 1
FORMAT
RGB
RGB RANGE NORMAL
Hint
TV ASPECT:
• Select “4:3 LETTER BOX”, so
that black bars may appear on
the top and bottom of the screen.
• Select “4:3 PAN & SCAN” for a
full height picture with both sides
adjusted.
• Select “16:9 WIDE” if a wide-
screen TV is connected to this unit.
• Select “16:9 SQUEEZE” when
the TV screen is too large
horizontally at “16:9 WIDE”
setting and when it is possible to
adjust the screen size using the
TV’s controls.
STILL MODE:
• Select “AUTO” usually.
• If you select “AUTO”, automati-
cally select the best resolution
setting (FRAME or FIELD) based
on the data characteristics of the
pictures. (default)
• If you select “FIELD”, the picture
in the still mode will be stabilized.
• If you select “FRAME”, the
picture in the still mode will be
highly defined.
• An individual picture on TV
screen is called a “frame”, which
consists of two separate images
called as “field”.
Some pictures may be blurred
at the “AUTO” setting in the
still mode due to their data
characteristics.
PROGRESSIVE MODE:
• You can select a mode below for
the progressive scan output.
• AUTO1: mode suitable for
images on the film mate-
rial.
• AUTO2: mode for images on the
material of 30-frame
film.
• VIDEO: mode for video material.
FORMAT:
• Select an HDMI output mode
between “YCbCr” and “RGB”.
• When the connected equipment
is not compatible with YCbCr,
HDMI signal is output as RGB
regardless of the setting.
• This setting is effective only when
you use the HDMI connection.
RGB RANGE:
• Select a HDMI picture mode
between “NORMAL” and “EN-
HANCED”.
• Select “ENHANCED” if the black-
white contrast is not clear.
• This setting is effective only for
HDMI RGB output.
PROGRESSIVE:
• You can set “PROGRESSIVE”
to “OFF” either in the DISPLAY
menu or by pressing and holding
[PLAY B] on the front of the unit
for more than 5 seconds.
• When “PROGRESSIVE” is “ON”,
video signals from VIDEO OUT
and S-VIDEO OUT jacks will be
distorted or not be output at all.
• PROGRESSIVE will not be able
to do a set change during the
HDMI output mode.
6 To exit the menu
6
To complete the
PROGRESSIVE
setting
5
PROGRESSIVE: QUICK
(Default: OFF)
See Hint on the right.
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
PROGRESSIVE OFF
PROGRESSIVE MODE AUTO 1
FORMAT
RGB
RGB RANGE NORMAL
4:3 LETTERBOX
AUTO
ON
AUTO 1
RGB
NORMAL
NO
YES NO
YES
Confirm again to use progressive scan.
If Picture is good, Select “YES”.
SELECT: K / L SET:ENTER
If there is no picture or you do
not press any buttons for 15
seconds, Progressive Scan
will switch to “OFF”.
Before proceeding…
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting “YES”,
wait about 15 seconds for auto recovery.
A c t i va t e P r o gr e s s i ve ?
SELECT: K / L SET:ENTER
NO
YES
If “PROGRESSIVE” is “ON”,
this message appears:
STILL MODE:
(Default: AUTO)
See Hint on the right.
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
PROGRESSIVE
OFF
PROGRESSIVE MODE AUTO 1
FORMAT
RGB
RGB RANGE NORMAL
STILL MODE
AUTO
FIELD
FRAME
PROGRESSIVE MODE:
(Default: AUTO1)
See Hint on the right.
TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
PROGRESSIVE
OFF
PROGRESSIVE MODE AUTO 1
FORMAT
RGB
RGB RANGE NORMAL
PROGRESSIVE MODE
AUTO1
AUTO2
VIDEO
FORMAT:
(Default: RGB)
See Hint on the right.
4:3 LETTERBOX
AUTO
OFF
AUTO1
YCbCr
NORMAL TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
PROGRESSIVE
OFF
PROGRESSIVE MODE AUTO 1
FORMAT
RGB
RGB RANGE NORMAL
RGB RANGE:
(Default: NORMAL)
See Hint on the right.
4:3 LETTERBOX
AUTO
OFF
AUTO1
RGB
ENHANCED TV ASPECT 4:3 LETTERBOX
STILL MODE AUTO
PROGRESSIVE
OFF
PROGRESSIVE MODE AUTO 1
FORMAT
RGB
RGB RANGE NORMAL
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
Select the
desired
setting.
ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
Select the
desired
setting.
ENTER
Select the
desired
setting.
ENTER
Select “YES”.
ENTER
SETUP
SETUP
ENTER ENTER ENTER
ENTER ENTER ENTER
ENTER ENTER ENTER
Select
“YES”.
ENTER
DVL1000G_E6A22UD.indd.indd 18 DVL1000G_E6A22UD.indd.indd 18 2006/03/25 13:06:00 2006/03/25 13:06:00