Olympus C-120 - Manual (Page 26)

26 En
En
J ERASING PICTURES
Recorded pictures can also be erased. This can be done either one frame or
all the pictures stored in the internal memory or on the card at a time.
Single-frame erase
1
Press with the lens barrier closed.
The monitor turns on.
2
Press to select the picture you want to erase.
3
Press .
The top menu is displayed.
4
Press to select ERASE.
5
Press to select YES, then press .
The picture is erased and the menu is closed.
All-frame erase
1
Display the top menu in the playback mode.
• Press with the lens barrier closed.
• Press .
2
Press to select MODE MENU.
3
Press to select the CARD tab, then press .
4
Press to select CARD SETUP, then press .
5
Press to select ALL ERASE, then press .
6
Press to select YES, then press .
All the pictures are erased.
Once erased, pictures cannot be restored. Check each picture before erasing
to avoid accidentally erasing pictures you want to keep.
basic_e.fm Page 26 Tuesday, February 5, 2002 2:48 PM