Oki 84 - Manual (Page 55)

48
|
Handbook
6 After you have completed your selection (by pressing
Yes
ᮤ or No ᮣ), the display shows SELECT LOC. again.
Continue to add or delete locations from your group.
Each group can contain up to a maximum of all of the
One Touch and Auto Dial locations available on your
MFP.
7 When you are finished programming your group, press
the No
ᮣ key. The display shows LOCATION
PROGRAMMING.
8 To program another group, go back to Step 3. If you are
finished, press the Select Function key.
Sending a Fax to a Group
To send a group fax, do the following:
1 Load your document.
2 Press the # key.
3 Press the number of the group you want to send to on
your numeric keypad.
4 Press Start.
To see a list of the groups and the locations within each
group, print a Telephone Directory. To do this:
1 Press the Select Function key.
2 Press the 6/Report Print key.
3 Press the No
ᮣ key continuously until PHONE
DIRECTORY appears.
4 Press the YES
ᮤ key.