Outlaw Audio 970 - Manual (Page 43)

 Model 970 7.1 Channel Preamplifier Processor
Owner’s Manual
Setup Codes
TroubIeshooting
Your new Model 970 is designed to provide years of trouble-free operation.
However, the complexity of today’s sophisticated home theater systems means
that you might encounter an occasional problem with your system involving
the Model 970.
Listed below are some of the more common issues you could encounter. For
additional hints on using the Model 970 or resolving problems we suggest that
you look at the Model 970 section of our website at www.outlawaudio.com, or
enter the Model 970 Section of our Outlaw Saloon. If your problem persists,
please call us at 866-OUTLAWS (688-5297) or 866-OUTLAWA (688-5292).
Symptom Possible Cause Solution Options
Unit does not turn on when remote or
front panel buttons are pressed
No AC Power Make certain AC power cord is plugged into a live outlet
Make certain rear panel MAIN POWER switch is ON
No sound from digital audio source Input not properly selected Make certain the correct digital input is associated to the source
No DTS when a DVD is playing Incorrect bitstream output from DVD player Check the DVD player’s setup menus to make certain DTS output is selected
Check the disc menu to make certain DTS is selected
No sound from rear surround speakers Incorrect speaker configuration Check Speaker Configuration menu to make certain that surround speakers are set to “small”
or “large”
Intermittent buzzing in tuner Interference from local sources Move or relocate the antenna
Move the antenna or unit away from computers, fluorescent or neon lights, or appliances
with motors
Unit does not respond to remote
commands
Low remote battery power
Remote set to different device
Remote sensor is obscured Change the batteries
Press the TNR button to make sure the remote is outputting 990 codes
Make certain the front-panel remote sensor is not blocked or connect an external remote
sensor
No sound from one or more channels Poor connections
Incorrect surround mode
Incorrect speaker configuration Check interconnects to the amplifier and connections from the amplifier to the speakers
Check surround mode to make certain it provides output to all speakers
Check Speaker Configuration menu to make certain all speakers are set to “small” or “large”
Setup Codes
CABLE CONVERTERS
Manufacturer/Brand Setup Code Number
ABC 0003, 0017
Americast 0899
Bell South 0899
General Instrument 0276, 0476, 0810
GoldStar 0144
Hamlin 0009, 0273
jerrold 0003, 0276, 0476, 0810
Memorex 0000
Motorola 1106
Pace 0237
Panasonic 0107, 0000
Paragon 0000
Philips 0305, 0317
Pioneer 0144, 0533, 0877
Pulsar 0000
Quasar 0000
Regal 0273, 0279
Bunco 0000
Samsung 0144
Scientific Atlanta 0017, 0477, 0877
Starcom 0003
Toshiba 0000
Zenith 0000, 0525, 0899
CD PLAYERS
Manufacturer/Brand Setup Code Number
Aiwa 0157
Burmester 0420
Cal. Audio Labs 0029
Carver 0157, 0179
DKK 0000
Demon 0003, 0873
Emerson 0305
Fisher 0179
Garrard 0420
Genexxa 0032, 0305
Harman/Kardon 0157, 0173
Hitachi 0032
jVC 0072
Kenwood 0028, 0190, 0826, 0037, 0626,
0681
Krell 0157
LX. 0305
Linn 0157
MCS 0029