Optoma EP759 - Manual (Page 18)

18 English ...
The Projector has multilingual On Screen Display menus
that allow you to make image adjustments and change a
variety of settings. The projector will automatically detect
the source.
How to operate
1. To open the OSD menu, press “Menu ” on the Remote Control
or Control Panel.
2. When OSD is displayed, use keys to select any item in the
main menu. While making a selection on a particular page, press
key to enter sub menu.
3. Use keys to select the desired item and adjust the
settings by key.
4. Select the next item to be adjusted in the sub menu and adjust as
described above.
5. Press “Menu ” to confirm, and the screen will return to the main
menu.
6. To exit, press “Menu ”again. If you don’t press any key, the
projector will automatically disappear after 30 seconds. The OSD
menu will close and the projector will automatically save the new
settings.
On Screen Display Menus
Main Menu
Sub Menu Setting
User Controls
Brightness
Contrast
Frequency
Phase
Sharpness
Zoom
Language Management PIP
Image - I Image - II Audio