Orion 52181 - Manual (Page 7)

12 13
EzCap
application Guide
Click Go  Applications  EzCAP,
then double click EzCAP Capture
icon.
Select “Digitizers” and “EzCAP” to
select device. Next Click “Record”
and select “Video Settings” on the
application window. Click Source
and select Composite or S-Video
to match your video source (Figure
19). Select “OK”. You should now
see the video in the video window.
Click Record
 Sound Settings
 Source  Unknown USB Audio
Device”, and set Speaker to “On”,
then click “OK” (Figure 20). You
should now hear the audio as your
inputted audio source.
You can also click Record icon, and
select “Record Setup” to set items
for recording, and select “Record”
to record the video programs.
uninstall the
application
Go to Macintosh HD 
Applications  EzCAP, and delete
the “EzCAP” folder (Figure 21).
Go to Macintosh HD
 Library 
QuickTime  EzCAP.component
and delete the “EzCAP.compo-
nent” (Figure 22).
Go to Macintosh HD
 System 
Library  Extensions  EzCAP.
kext and delete the “EzCAP.kext”
(Figure 23).
Now you finished the uninstallation
application.
Video
impression
installation
To start the Video Impression soft-
ware installation please insert the
software CD into your CD drive.
Additional online software
“Rosetta” may need to be installed
if prompted.
Normally, applications
intended for Mac computers based
on PowerPC processors don’t work
on Macs based on Intel proces-
sors. But if you install Rosetta, you
can use applications intended for
PowerPC-based Macs.
Follow on screen instructions to
install “Rosetta”. An internet con-
nection will be required to download
“Rosetta”.
Select your language for the
installation and Click
Agree 
Continue  Install. Enter your
name, company name and license
key of software (Figure 24).
(License key is on the CD bag)
Once successfully installed a confir-
mation window will appear (Figure
25). Click “Close” to finish the soft-
ware installation.
Video impression
settings for
Capturing
Click “Go” and select
“Applications”, double click “Video
Impression.
Select “Create a New Video”
and “Capture from Device”
(Figure 26).
Figure 21. Uninstall Application.
Figure 19. Video Settings.
Figure 22. Uninstall Component.
Figure 20. Sound settings.
Figure 23. Uninstall extensions.
Figure 24. Video Impression install.
Figure 25. Successful Video
Impression install.
Figure 26. Capture from Device.