Onkyo DV-S717 - Manual (Page 12)

12
Connecting to a TV
Connect the DVD player to your TV.
•
Refer to the instruction manual of the connected TV and how to activate TV input as well.
•
When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any
connections.
•
If your television set has one audio input, connect the DVD player to a Y cable adapter (not supplied) and then connect to your TV.
•
Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, TV/VCR combination or video selector, the playback
picture may be distorted as DVD discs are copy protected.
Connecting to a TV
Notes:
■ Setting of the output sound type
From the on-screen displays, set the “Audio Out Select” to “Analog 2ch”.
Connecting headphones
Connect headphones to the PHONES jack on the front panel using a
stereo plug.
Before connecting, temporarily turn down the volume with the PHONES
LEVEL volume. Readjust to your preference when playback begins.
Power plug
(white)
Signal flow
To ANALOG AUDIO OUT
To audio inputs
(white)
(red)
Audio·video cable (supplied)
To wall outlet
To
VIDEO
OUT
To S VIDEO OUT
S video cable (supplied)
If the TV has an S video input, connect the
DVD player with the supplied S video cable.
(yellow)
To S video input
TV or monitor with
audio video inputs
(red)
(y
ello
w)
To video input
For details of Output sound, see . 29
VIDEO OUT
S VIDEO VIDEO
R
L
ANALOG
OUTPUT DIGITAL
OUTPUT REMOTE
CONTROL
COAXIAL OPTICAL
Y C B C R
PHONES LEVEL TITLE
STANDBY
MENU PHONES
SYSTEM
POWER
MIN MAX
C
DIMMER OPEN
MAX
PHONES LEVEL
MIN
38